PLC Based Automatic Drainage Water Monitoring & Control System
PLC Based Automatic Drainage Water Monitoring & Control System report
In this research paper the proposed concept is to replace the manual work in drainage cleaning by automated system. Now-a-days even though automation plays a vital role in all industrial applications in the proper disposal of sewages from industries and commercials are still a challenging task. Drainage pipes are using for the disposal and unfortunately sometimes there may be loss of human life while cleaning the blockages in the drainage pipes. To overcome this problem and to save human life we implement a design “Automatic drainage water pump monitoring and control system using PLC and SCADA”. The PLC and SCADA were the emerging tools for solving real time problems and we designed our project to use this in efficient way to control the disposal of wastages and with regular filtration of wastages, clearance of gaseous substance by means of absorb and store in the separate way where the toxic and non-toxic gases are treated separately and monitor the disposal in frequent manner.
Automatic Drainage Water Pump Monitoring and Control System Using PLC and SCADA proposed to overcome the real time problems.With the continued expansion of industries, the problem of sewage water must be urgently resolved due to the increasing sewage problems from industries of the surrounding environment.The waste and gases producedfrom the industries are very harmful to human beings and to the environment.Our proposed system is to monitor and control the drainage level using PLC and SCADA technique. PLC is the major controlling unit and the drainage level is monitor by supervisory control and data acquisition technique(SCADA).
Power is in ON the sensor senses then relevant parameters and the output is given to the PLC kit. The ON and OFF operation is controlled with the sensor operation and each and every parameters are controlled with the relevant condition.When the power is switched on the stepper motor is also switched on and the relevant action is undertaken with the use of stepper motor.Initially mediumlevelwatersensor gets the signal normallyclose then the signal given to compressorthen operates in minimum pressure. Then the highlevel water sensor getsthesignalnormally close thenthe signal to given maximum pressure to operate in the compressor. Pressure sensor gets the signalnormally closeand that signal isgiven to the pressure valveis get open.If the pressure of sewage water exceeds certain pressurevalve gets operated.Gassensor getsthe signalnormally closeand that signal is given by gas exhaustergets open. It’s is the condition the tank is open or not. The filtering plates are operate based on the normally closesignalto given the Stepper motor. The heart of the proposed system is operated by stepper motor connected plates.The operation is similar toMCB (miniature circuit breaker) each switches are operated with the sensor operation.