Abstract — Arduino EEG Acquisition
described here was designed to be used in an in-vitro set-up for vascular access hemodynamics research, and hence incorporates a gear pump that can deliver up to around 1.5 l/min (steady Iow) in a test Iow loop. After a number of simple identiIcation experiments to assess the dynamic behaviour of the system, a feed-forward control routine was implemented.
Sensor Interfacing & Analog Front-End Conditioning
The resulting system was shown to be able to produce the targeted patient-speciIc waveform with less than 3.6% error. Finally, we outline how to further increase the accuracy of the system, and how to adapt it to speciIc user needs. Figure 1: Diagnostic Medical Waveform & Bio-Potential Clinical Trace for Arduino Eeg Acquisition In-vitro experiments are a useful tool in hemodynamics research, oIering a wide range of applicable experimental techniques, combined with good accuracy and reproducibility. To simulate physiologically realistic pulsatile Iow, a dedi- cated pumping system is used in these experiments. This can either be a mock loop representing the full circulatory system [8, 9], or a pump that reproduces a waveform measured locally in-vivo [4, 5, 6, 7, 12]. For both cases, pumps are commercially available. However, researchers of- ten employ in-house built systems, for example because of cost considerations, or to add speciIc functionality. Examples of pumping systems that were devel- oped to reproduce physiological waveforms are a gear pump driven by a stepper motor or servomotor, the rotation rate of which is controlled by a microcom- puter (Hoskins et al. ) or personal computer (Plewes et al. ), a controlled piston pump (Chaudhury et al. ), or a combination of both: a gear pump to deliver the steady Iow component, and a piston pump to generate the pulsatile component (Tsai and Sava¸s ).
Bio-Signal Waveform Analysis & Simulation Findings
With so many options already available, the goal of our current work is not so much to develop a superior system as to design a system that is aIordable and relatively simple to set up, using oI-the-shelf components. With this in mind, the full source code for the control of the pump is included as a supplement to this note.
Scope & Clinical Applications
- Real-time multi-parameter vital signs telemetry (ECG, Heart Rate, SpO2, Temperature, Respiration)
- Low-noise Analog Front-End (AFE) conditioning with active Driven Right Leg (DRL) 50 Hz cancellation
- Digital signal processing in MATLAB: Pan-Tompkins QRS detection, FIR/IIR notch, and Continuous Wavelet Transforms
- Finite element tissue bio-electromagnetics and orthopedic mechanical simulations in COMSOL & ANSYS
- Complete Arduino firmware .INO sketches, circuit schematics, and university dissertation reports
Bio-Potential Sensors
ECG, EEG, EMG & PPG optical probes
Low-Noise AFE
INA128 / AD8232 instrumentation amps
Arduino Firmware
Real-time ADC interrupt sampling & BLE
MATLAB Bio-DSP
Pan-Tompkins QRS & wavelet transforms
COMSOL Multiphysics
Tissue electro-thermal & SAR simulation
IEC 60601-1 Safety
Galvanic optical & magnetic isolation
Biomedical Sensors, Electronics & Simulation Suites
Engineered using clinical-grade bio-transducers, low-noise analog amplifiers, and multi-physics simulation platforms.
| Subsystem / Software | Diagnostic & Engineering Role | Instrumentation Tier |
|---|---|---|
| Arduino / ESP32 MCU | High-speed SPI/I2C sensor polling, 500 Hz timer interrupt ADC sampling, BLE telemetry streaming | Embedded Hardware |
| MATLAB R2024b | Pan-Tompkins QRS detection, 50 Hz Butterworth notch filtering, wavelet decomposition, SpO2 ratio | Signal Analytics |
| COMSOL Multiphysics | Electromagnetic tissue absorption (SAR), bio-heat thermal transfer, acoustic transducer wave propagation | Tissue Physics |
| ANSYS Mechanical | Orthopedic bone-implant contact mechanics, prosthetic socket stress distribution, dental load FEA | Biomechanics FEA |
| AD8232 / ADS1298 AFE | Medical-grade 3-lead ECG front-end with built-in instrumentation amp, DRL feedback, and high CMRR | Clinical AFE IC |
Biomedical Acquisition & Multi-Physics Simulation Workflow
Comprehensive signal flow from human bio-potential electrodes and optical sensor probes to embedded Arduino firmware, MATLAB DSP, and COMSOL tissue modeling.
(ECG/EEG/PPG/Temp)
(INA128 / DRL Loop)
500Hz ADC Sampling
& QRS Detection
Tissue FEA Models
& EHR Dashboard
Verified Medical Waveforms, Diagnostic Images & Sensor Circuits
Advantages of the Arduino EEG Acquisition Project
Why this biomedical engineering project delivers superior academic grades and provides high technical evaluation standing.
Clinical Diagnostic Precision
Combines high-CMRR analog front-ends with precision digital filtering to extract microvolt bio-potentials with high SNR (> 35 dB).
Rigorous IEC 60601-1 Patient Safety
Incorporates dual galvanic isolation barriers (optical/magnetic) ensuring patient auxiliary leakage currents remain strictly under 10 μA.
Multi-Sensor Vital Signs Fusion
Simultaneously captures ECG, PPG, SpO2, Core Temperature, and Respiration for comprehensive physiological health monitoring.
Real-Time Arduino Embedded Firmware
Features optimized C++ interrupt-driven ADC sampling routines ready for immediate deployment on Arduino, ESP32, and STM32.
Validated Pan-Tompkins QRS Algorithm
Executes derivative, squaring, moving-window integration, and dual-threshold peak detection with > 99% R-peak accuracy.
COMSOL & ANSYS Multi-Physics Coupling
Models complex anatomical tissue structures, bio-electromagnetic Specific Absorption Rates (SAR), and prosthetic stress fields.
Driven Right Leg (DRL) Noise Suppression
Actively senses and neutralizes 50/60 Hz powerline hum and common-mode displacement currents without loading patient electrodes.
DICOM Medical Imaging Pipeline
Processes clinical MRI, CT, and Ultrasound scans using MATLAB contrast enhancement and morphological lesion boundary segmentation.
Direct Telehealth & Hospital IoT Readiness
Streams validated vital signs to mobile dashboards and electronic health records over encrypted BLE and MQTT protocols.
Complete Turnkey Project Package
Delivered with full Arduino .INO sketches, circuit schematics, MATLAB .m algorithms, university-format report, and viva defense slides.
Sample Arduino Firmware, ECG Waves & Sensor Telemetry
Representative excerpts illustrating the embedded sensor acquisition loop, live physiological waveform traces, and clinical parameter schedules.
[*] Synchronizing EEG AFE Channel-1 (Sampling: 250 SPS | ADS1299 Low-Noise)... [✓] Impedance Check Passed: Z_skin = 4.2 kOhm < 5.0 kOhm (Ag/AgCl Cup Electrodes) ──────────────────────────────────────────────────────────────────────── [11:20:01.012] WAVE Ch1 (Fp1-A1): +18.42 uV | Delta: 1.2 Hz (Drowsiness Index: Normal) [11:20:01.016] WAVE Ch1 (Fp1-A1): +24.18 uV | Theta: 5.8 Hz (Relaxed Mental State) [11:20:01.020] ALPHA Alpha Rhythm Burst Detected (10.4 Hz): Power = 48.6 uV^2/Hz [11:20:01.024] BETA Beta Rhythm Spectral Density (18.2 Hz): 12.1 uV^2/Hz ──────────────────────────────────────────────────────────────────────── [✓] COMSOL Brain Electromagnetic Field Distribution: SAR = 0.014 W/kg (Safe Limit)
[*] Synchronizing vital signs telemetry stream across bio-sensor channels...
| Frequency Band | Bandwidth (Hz) | Mean Amplitude (μV) | Power Density (μV²/Hz) | Clinical Cognitive State |
|---|---|---|---|---|
| Delta (δ) | 0.5 - 4.0 Hz | 12.4 | 14.2 | NORMAL (AWAKE) |
| Theta (θ) | 4.0 - 8.0 Hz | 18.6 | 22.8 | CALM / RELAXED |
| Alpha (α) | 8.0 - 13.0 Hz | 48.6 | 68.4 | DOMINANT RHYTHM |
| Beta (β) | 13.0 - 30.0 Hz | 14.2 | 12.1 | ACTIVE COGNITION |
[✓] Diagnostic Evaluation: Patient physiological parameters within verified clinical tolerance band.
Frequently Asked Questions
Project Deliverables & Support
Everything needed from project inception to final viva defense — delivered with expert biomedical support.
.INO Sketches
Schematics
Algorithms
Report
Slides
Models
Datasets
Q&A
Support
Extension